Catalogue sheet of the grey ribbed reinforced plastic edge protector with a drawing of its use under strapping
EMBALAJES FONTANET · Edge and pallet protection

Reinforced HDPE edge protector

A rigid plastic edge protector, recycled and recyclable, that protects the corners of heavy loads and lasts for many trips.

The reinforced edge protector is the plastic version of the pallet edge protector. It is placed on the corner of the load, under the strapping or film, and does the same job as the cardboard one: it protects the edge against impacts and deformation and spreads the pressure of the securing so that it does not damage the goods. The difference lies in the material and, above all, in the kind of loop it is designed for.

It is made from HDPE, high-density polyethylene, recycled and recyclable. In our catalogue it also appears as a reinforced PVC edge protector, but the material of the piece we supply is HDPE. Its ribbed design gives it far greater rigidity and strength than cardboard, so it is not crushed by well-tensioned strapping and does not lose its shape when knocked by a forklift. It also improves the stability of the whole load when stretch film or strapping is applied.

Its logic is the opposite of the cardboard edge protector. The cardboard one leaves with the pallet and is recycled at destination; the reinforced one is designed to stay and come back. It pays off with heavy loads and in closed loops, such as deliveries to your own shops, fixed routes or returnable packaging, where the same piece makes many trips and its cost is spread across all of them. In an export shipment that does not return it makes no sense, because it is lost on the first trip.

Its limits should be borne in mind. It cannot be cut at destination like cardboard, it weighs more per unit and it does not allow the customisation of size, colour and printing that the cardboard edge protector does. In return, with its long service life, its environmental argument is reuse: a piece that makes many trips can come out better than cardboard thrown away with every shipment. It is with steel or polyester strapping on heavy loads that its strength shows most.

At Fontanet Group, from Fraga (Huesca) and with a team of more than 30 years in the sector, we work with both families of edge protector and help you choose according to your loop. Tell us what loads you protect, how much they weigh and whether the pallet comes back, and our sales team will confirm the model and sizes available.

Advantages

  • Maximum corner protection. Withstands impacts and deformation that would crush cardboard.
  • Reusable. Designed for closed loops where the piece makes many trips.
  • Recycled HDPE. A recycled material that is recyclable at the end of its service life.
  • Spreads the pressure. Stops strapping or film from damaging the goods.
  • High strength. Ribbed design for heavy loads and firm strapping.

Specifications

FeatureDetail
MaterialRecycled and recyclable HDPE
DesignRigid angled piece with reinforcing ribs
UseCorners of palletised loads, with strapping or stretch film
Recommended loadHeavy
LoopClosed, with returnable packaging
Service lifeLong, reusable
SizesOn request

Model, sizes and compatibility with your strapping width are confirmed with the sales team.

Which sectors is it for?

  • Metal and machinery industry
  • Building materials and ceramics
  • Distribution to own shops
  • Logistics with returnable packaging
  • Timber and board

Interested?

Call us on 974 47 35 06 or message us on WhatsApp at 649 943 962.

Frequently asked questions

Is the reinforced edge protector made of PVC or HDPE?

In our catalogue it is listed as a reinforced PVC edge protector, but the piece we supply is made from recycled and recyclable HDPE, according to its product sheet.

When does it pay off compared with cardboard?

When the load is heavy or the packaging comes back in a closed loop, because the same piece is reused many times. If the pallet leaves and does not return, cardboard makes more sense.

Is it used with strapping or film?

With both. It improves stability when applying stretch film or strapping and spreads the pressure of the securing; it is with tensioned strapping on heavy loads that its rigidity is put to best use.

Related guideComplete Guide: Cardboard Corner Protectors for Palletizing → SolutionsStrapping and Securing →

Related products

Need more information?

We advise you with no obligation and help you choose the right option for your process.

Email us: emfo@fontanetgroup.com